Full Range of Metal Cutting
Circular Saw Blades
Tel: 86-18705785039
Whatsapp:86-18057873898

HSS-TiSiN

Multi Face-TiSiN:It is obtained from a plasma with a specific titanium, carbon and Silicon composition, 3.0mm microns multi-layers thickness; it gives the coating a very low friction coefficient of 0,20 as well as a considerable deposited-layer hardness of 3200 Vickers. These two characteristics give the circular blades not only high performance standards by reducing wear but also an improvement in cut finish. This coating has an oxidation temperature of 500°C .It is particularly suitable for cutting stainless steel, hardened steel as well as brass and

HSS-DMo5 Chemical Composition:

C Si Mn P S Cr Mo V W
0.85-0.89 ≤0.4 ≤0.4 ≤0.030 ≤0.030 3.9-4.2 4.65-4.95 1.8-2.0 5.65-6.05

HSS-Co5 Chemical Composition:

C Si Mn P S Cr Mo V W Co
0.85-0.89 ≤0.4 ≤0.4 ≤0.030 ≤0.030 3.9-4.2 4.85-5.15 1.8-2.0 5.85-6.20 4.8-5.0

HSS-DMo5Co2 Chemical Composition:

C Si Mn P S Cr Mo V W Co
0.85-0.89 ≤0.4 ≤0.4 ≤0.030 ≤0.030 3.9-4.2 4.65-4.95 1.8-2.0 5.65-6.05 1.8-2.2
Center Bore Driving-Hole Pattern
32mm 2/8/45+2/9/50+2/11/63, 2/8.5/45+4/12/64,

2/8/45+2/9/50+2/11/63+2/12/64, 4/12/64

38mm 2/8.5/55+4/12/64
40mm 2/8.5/55+4/12/64, 4/12/64
50mm 4/15/80, 4/15/80+4/14/85
90mm 3/12.5/160, 4/12.5/160
A shape is used in case of small tooth pitch (T<3MM) or to cut brass alloy, jewellery and screw slotting
AW shape is added to the A shape the bevel that allow to optimize the chips shredding
B shape is used for saw blades with thin thickness(<1.3mm) as an alternative of BW
BW shape is the standard tooth shape for the pipe cutting
HZ(C) Shape tooth is used in the silid cutting or to cut the thickess (>3mm) pipes
STANDARD EXECUTION
Diameter
 (mm)
Thickness
(mm)
Bore
(mm)
Hub
(mm)
Number of teeth(tooth pitch) and tooth form
T3 T4 T5 T6 T7 T8 T9
BW BW BW HZ HZ HZ HZ
200 1 25.4/32 90 200 160 130 100 90 80 70
200 1.2 25.4/32 90 200 160 130 100 90 80 70
200 1.5/1.6 25.4/32 90 200 160 130 100 90 80 70
200 2.0 25.4/32 90 200 160 130 100 90 80 70
225 1.0 25.4/32 100 220 180 140 120 100 90 80
225 1.2 25.4/32 100 220 180 140 120 100 90 80
225 1.5/1.6 25.4/32 100 220 180 140 120 100 90 80
225 2.0 25.4/32 100 220 180 140 120 100 90 80
225 2.5 25.4/32 100 220 180 140 120 100 90 80
250 1.0 32 100 240 200 160 128 110 100 90
250 1.2/1.3 32 100 240 200 160 128 110 100 90
250 1.5/1.6 32 100 240 200 160 128 110 100 90
250 2.0 32 100 240 200 160 128 110 100 90
250 1.5/1.6 32 100 240 200 160 128 110 100 90
275 1.0 32/40 100 280 220 160 140 120 110 96
275 1.2/1.3 32/40 100 280 220 180 140 120 110 96
275 1.5/1.6 32/40 100 280 220 180 140 120 110 96
275 2.0 32/40 100 280 220 180 140 120 110 96
275 2.5 32/40 100 280 220 180 140 120 110 96
300 1.2/1.3 32/40 100 300 220 180 160 140 120 104
300 1.5/1.6 32/40 100 300 220 180 160 140 120 104
300 2.0 32/40 100 300 220 180 160 140 120 104
300 2.5 32/40 100 300 220 180 160 140 120 104
300 3.0 32/40 100 300 220 180 160 140 120 104
315 1.5/1.6 32/40 100 300 240 200 160 140 120 104
315 2.0 32/40 100 300 240 200 160 140 120 110
315 2.5 32/40 100 300 240 200 160 140 120 110
315 3.0 32/40 100 300 240 200 160 140 120 110
325 1.5/1.6 32/40 120 320 250 200 170 146 128 110
325 2.0 32/40 120 320 250 200 170 146 128 110
325 2.5 32/40 120 320 250 200 170 146 128 110
325 3.0 32/40 120 320 250 200 170 146 128 110
350 1.8 32/40/50 120 350 280 220 180 160 140 120
350 2.0 32/40/50 120 350 280 220 180 160 140 120
350 2.5 32/40/50 120 350 280 220 180 160 140 120
350 3.0 32/40/50 120 350 280 220 180 160 140 120
370 2.0 32/40/50 120 380 280 220 190 160 140 120
370 2.5 32/40/50 120 380 280 220 190 160 140 120
370 3.0 32/40/50 120 380 280 220 190 160 140 120
400 2.0 32/40/50 130   310 250 200 180 160 120
400 2.5 32/40/50 130   310 250 200 180 160 140
400 3.0 32/40/50 130   310 250 200 180 160 140
425 2.0 32/40/50 130   320 260 220 190 160 150
425 2.5 32/40/50 130   320 260 220 190 160 150
425 3.0 32/40/50 130   320 260 220 190 160 150
425 3.5 32/40/50 130   320 260 220 190 160 150
450 2.0 40/50 130   350 280 230 200 160 160
450 2.5 40/50 130   350 280 230 200 180 160
450 3.0 40/50 130   350 280 230 200 180 160
500 2.5 40/50 140   390 310 260 230 200 170
500 3.0 40/50 140   390 310 260 230 200 170
500 3.5 40/50 140   390 310 260 230 200 170
525 3.0 40/50 140   360 330 270 230 200 180
525 3.5 40/50 140   360 330 270 230 200 180
525 4.0 40/50 140   360 330 270 230 200 180
550 3.0 50/90/140 200/225   380 340 280 250 220 190
550 3.5 50/90/140 200/225   380 340 280 250 220 190
550 4.0 50/90/140 200/225   380 340 280 250 220 190
560 3.0 50/80 220   450 360 300 250 220 190
560 3.5 50/80 220   450 360 300 250 220 190
560 4.0 50/80 220   450 360 300 250 220 190
600 3.0 50/80/90/140 220   460 380 320 270 240 210
600 3.5 50/80/90/140 220   460 380 320 270 240 210
600 4.0 50/80/90/140 220   460 380 320 270 240 210
630 3.5 80/90/140 220   480 390 320 280 240 210
630 4.0 80/90/140 220   480 390 320 280 240 210